With inflation in Australia forecast by the Reserve Bank to stay above 3 per cent until late 2027, investors are paying closer attention to bonds that protect against rising prices. Australia’s inflation-linked government bonds, known as Treasury Indexed Bonds (TIBs), are the main local example. This article explains how they work, what a real yield is, how to read breakeven inflation, and the risks and limitations involved.
How indexation works
An ordinary, or nominal, bond pays a fixed coupon on a fixed face value. An inflation-linked bond instead adjusts its principal for changes in a price index, which in Australia is the Consumer Price Index (CPI). The Reserve Bank of Australia’s (RBA) October 2024 Bulletin explains that both principal and coupons are adjusted, because “the coupon is paid on the inflation-adjusted principal value.”
The coupon rate is fixed at issue and stays the same for the life of the bond. According to the AOFM’s Australian Government Bonds website, a bond with a 4 per cent coupon pays 1 per cent of its CPI-adjusted nominal value each quarter. As prices rise, the capital value rises, and so do the dollar coupons.
The RBA notes that Australian indexed bonds pay quarterly coupons, are issued with maturities of 5 to 20 years, and have a deflation floor that protects the par amount at maturity. Because the CPI is published quarterly, indexation operates with a lag of around five to six months.
A worked example
Illustrative only, ignoring the indexation lag. Suppose an investor holds an indexed bond with a face value of $100 and a 2 per cent annual coupon, paid quarterly. If the CPI rises by 3 per cent, the adjusted capital value becomes:
$100 × 1.03 = $103.00
The next quarterly coupon is one quarter of the 2 per cent coupon rate applied to the adjusted capital:
$103.00 × 0.5% = $0.515, compared with $0.50 before the adjustment.
Over time, both income and principal track inflation, so the 2 per cent coupon represents a return above inflation, not before it.
Real yields and breakeven inflation
Because the payments are indexed, the yield on an inflation-linked bond is a real yield: the return above inflation if the bond is held to maturity. The yield on a nominal bond of similar maturity includes compensation for expected inflation.
The difference between the two is the breakeven inflation rate, which the RBA describes as the inflation rate that equalises the expected return on an indexed bond and a nominal bond of equivalent maturity. If inflation turns out higher than the breakeven, the indexed bond outperforms; if lower, the nominal bond does better.
Illustrative only. If a 10-year nominal bond yields 5.13 per cent and a 10-year indexed bond yields 2.00 per cent real, the simple breakeven is 5.13 − 2.00 = 3.13 per cent. Using the more precise compounding formula, (1.0513 ÷ 1.02) − 1, it is about 3.07 per cent.
Why breakevens are not a pure inflation forecast
The RBA cautions that breakevens measure inflation compensation, which is not the same as expected inflation. Two factors push in opposite directions:
- Liquidity premium: indexed bonds trade less than nominal bonds, and the RBA notes that “liquidity premia are generally larger in indexed bond yields,” which tends to push breakevens down.
- Inflation risk premium: investors may demand extra compensation for uncertainty about inflation, which tends to push breakevens up.
Australia’s long indexation lag and differences in coupon frequency also require technical adjustments. The market is small: the RBA put indexed bonds at about 4 per cent of Australian government debt, with seven lines outstanding compared with 38 nominal lines. Domestic super funds, insurers and fund managers account for around half of turnover and often hold to maturity to match inflation-linked liabilities, which further limits liquidity.
Breakevens remain a useful signal. In the minutes of its November 2026 meeting, the RBA Board noted that long-term inflation compensation stayed broadly consistent with targets, and attributed the rise in long-term yields to some combination of higher expected policy rates and higher term premia.
Risks to understand
Inflation-linked bonds are not risk-free in market value terms. Their prices fall when real yields rise, and longer maturities carry more duration risk. If inflation undershoots the breakeven priced in at purchase, returns will lag a comparable nominal bond. Liquidity can be thinner, and the indexation lag means protection is delayed. The tax treatment of the inflation uplift to capital is a further consideration.
Key points
- Treasury Indexed Bonds adjust principal for CPI, and coupons are paid on the adjusted principal.
- The yield on an indexed bond is a real yield; the gap to a nominal yield is breakeven inflation.
- Breakevens are affected by liquidity and inflation risk premia, so they are not a pure forecast.
- A deflation floor protects par at maturity, but market prices can still fall when real yields rise.
- The Australian market is small and concentrated among long-term holders.
This article is general information only and does not take into account your objectives, financial situation or needs. It is not financial advice.
Sources
- Reserve Bank of Australia – Bulletin: Inflation-linked Financial Markets, October 2024
- Australian Government Bonds (AOFM) – Coupon interest and yield: exchange-traded Treasury Indexed Bonds, accessed 17 November 2026
- Reserve Bank of Australia – Minutes of the Monetary Policy Board Meeting, 2–3 November 2026, 17 November 2026
Image: Martin Kingsley, Wikimedia Commons, CC BY 2.0; cropped and colour overlay added by FINA.





























